How to winterize a jet ski with antifreeze

I filled a bucket with two gallons rv antifreeze started motor then started pump. Be sure to read the instructions on the stabilizer fluid before using it.

Kawasaki Ultra Coolant Flush - YouTube.

How to winterize a jet ski with antifreeze. How to Winterize a Jetski with Antifreeze. Kawasaki Ultra Coolant Flush - YouTube. Quicklinks to items you might needFlush Plug.

Start your jet ski out of the water. With the hose connected and the engine on slowly pour in the pink RV Marine Antifreeze. Pour the whole gallon of antifreeze into the jet ski flushing port.

Seeing the antifreeze come out of the nozzle andor the exhaust is. To winterize a jet ski start by removing it from the water and making sure the stern is higher than the bow so it can be drained. Next turn the throttle back and forth to drain the water.

Running antifreeze through SXR winterizing. Starting the motor wont make any water flow. Water is pumped into the engine solely by pressure in the jet pump.

Pouring coolant into the flush fitting will be fine. I would plug the line in the jet pump so that you can actually fill up the motor. Mix Antifreeze in the bucket with water 11.

Do not use car antifreeze. Use boat and RV antifreeze only. Mix one gallon of antifreeze with one gallon of water.

Flush antifreeze mixture through the exhaust system. Simply use gravity or a pump to feed antifreeze through the. To start with I lifted my trailer with ski to gravity drain as much water as I can.

I filled a bucket with two gallons rv antifreeze started motor then started pump. The pink came out the jet pump area exhaust fittings etc but it never came out the tell tale. This concerned me so I revved it for a few minutes.

2 gallons later still nothing. Pour about a cup of antifreeze down the rubber tube. Lift this rubber tube up so the antifreeze flows to water box and prevents and water inside the water box from freezing.

In this how-to video we show you how we protect our exhaust system from the threat of a freezing winter by pumping non-toxic RV antifreeze through it NEVE. You will want to keep your jet ski engine and components from freezing as well. This involves getting all of the water out of the engine and coolant system.

In most skis you can accomplish this by starting the ski and running RV antifreeze through the freshwater intake valve. To winterize a jet ski that wont start first remove the spark plugs and spray fogging oil. Next use gravity to force RV antifreeze into the cooling system.

After that spray fogging oil in the carburetor and move the PTO driveshaft. After this is complete replace the spark plugs and you have a winterized ski. How to Winterize a Jet Ski.

To winterize a jet ski you need to take three important steps. Fill up the tank add stabilizer to the gas then run the engine for two minutes. Flush the systems with a 5050 mixture of RV and water for another two minutes.

Lubricate the metal and moving parts. Finally store the jet ski in a secure place properly. Dry the jet ski completely and wax it until it is fully coated and shiny.

Then cover the jet ski in a jet ski cover and store it as planned. How much antifreeze do I need to winterize my jet ski. It depended on your jet ski size.

But most people use roughly 5 gallons of antifreeze mixture to flush their jet skis. If you have experience with jet skis and how to winterize them you can do it yourself in 30-45 minutes and save 50-75 off the shop fees. It takes us 2-3 hours and 125 per ski in supplies to completely winterize our 2 Sea Doo RX 260s.

Compare that to 400-600 dealer prices. If you want to alternate between moving the throttle back and forth turn the jet ski onIn 30 second intervals do thisContinue until water is no longer being expelled from the jet ski. Put water and antifreeze in a bucket.

Winterizing the exhaust is only necessary if you live in a cold climate and plan to store your jet ski outdoors during the off-season. Make a 5050 solution of water and RV antifreeze Hook up a hose or water pump to the flush outlet and place the opposite end in the solution. To winterize a Sea-Doo properly you have to add stabilizer to the gas first and fill up the tank completely.

Then you have to flush the exhaust system with antifreeze and when its done drain the liquid completely. Additionally lubricate the moving parts remove the battery and store it properly for the winter months. Finally its recommended to clean the Sea-Doo carefully and store it in a secure place.

Fill the gas tank and then top it off with a stabilizer which will keep it clean. Run the jet ski engine to mix the gas and the stabilizer thoroughly. Be sure to read the instructions on the stabilizer fluid before using it.

Also be sure to note that the stabilizing fluid is for gasoline engines not diesel.