Turn key nothing happens battery is good

If you nothing dont even try to turn over check your battery wires loose or dirty connection. 2006 express 2500 48L.

Valleyautotech on June 22 2010.

Turn key nothing happens battery is good. Steps to Diagnosing a car that you turn key and nothing happens from Chrisfix Video. Check battery charge and battery connections for corrosion. Tighten battery terminals and check to make sure headlights workseem stronginterior lights work.

Turn key nothing happens. Is the car in Park or Neutral Do you know if your car has a wheel lock feature. The wheel is not locked.

I dont see a shift indicator line under PRND21. What is the modelyear of your Chevy. 2006 express 2500 48L.

An expert whose answer got voted for 20 times. Battery good turn key nothing happens. If you nothing dont even try to turn over check your battery wires loose or dirty connection.

Put the key in the ignition this time then turn the key. Seriously if nothing happens when you turn the key there are quite a few things that could be wrong with your car. There is a good chance its your battery.

Look at your cars interior lights to see if youre drawing any power. If nothing is on then its very likely your battery. Turn key nothing happens It could be the parkneutral switch next time it doesnt start try wiggling the shifter in park while turning the key or shift to neutral and see if that will work.

If that doesnt change the problem I would replace the ignition switch. The key turn completes a small circuit that tells the battery to release power to the starter solenoid. The solenoid ramps up the power given to it and that power causes the starter motor to turn very quickly.

This turning is translated to the engine which turns as if. Or try turning the ignition key all the way forward to the start Position with one hand and with your other hand reach around and push in the button on your shifter and ever so GENTLY rock your shifter back and forth SLIGHTLY and with Great Finesse while still in park. It may take several practice attempts but she should start up.

Battery is good. If you run direct power to starter it works. BUT when you try to turn on the ignition there is nothing.

Thats not a safety switch. A safety switch stops you from starting the engine. It doesnt cut all electrical power on the entire machine.

I tried to start it yesterday and when I turn the key in the ignition nothing happens. I got a new battery but same thing. I checked the terminals for corrosion and the leads seem fine.

I am attaching a link to a video showing an attempt to start it up. One thing I wanted to point out is that the radio turns off when turning the ignition to the three position even with the new battery. Hi guys Thanks in advance for any help I have a 01 2500HD Crew cab with the 60.

Tonight I stopped at the gas station to grab some milk. When I came back out the truck would not do anything when I turned the key. Battery was good lights came on.

Here is the relearn procedure. Turn ON the ignition with the engine OFF. Attempt to start the engine then release the key to ON vehicle will not start.

Observe the SECURITY telltale. After approximately 10 minutes the telltale will turn OFF. The vehicle is now ready to relearn the Pass lock Sensor Data Code andor password XXXXX the next.

If the battery is good and turning the key does NOTHING you have an open circuit. Try to turn engine by hand to ensure engine is not seized. If your mower has hood lights or dash lights go ahead and turn them on.

Try to turn engine by hand to ensure engine is not seized. Valleyautotech on June 22 2010. Are you sure the battery is good and charged as a weak battery will still power the lights and dash But wont have the amps to engage the starter.

Have the battery load tested at any auto parts store. Then check the ignition switch etc. You can find it either under the hood or under the seat near the battery.

It will always be located near the battery in almost all riding lawn mowers. If the fuse is good have the battery tested at your local parts store or check for voltage with a volt meter or VOM. Upon turning the key there is no response.

No click no turning of the starter just silence as if the battery had absolutely no juice. Check to make sure yu have 12v at the battery once you do turn the ignition to start if nothing check the fuse and relays that control ignition if all is good then the click sound is coming from the starter have the solenoid replace. In this video I go over how you can perform a no crank no start diagnosis whether all you hear is a click or even if the battery tests good but wont start.

Only when its cold. Turn the key and its like the battery is dead. I have replaced the ignition and the kill switch and the key as these were suggested by the dealer.

Is there a relay somewhere that can be screwing up when it s cold. If you turn the key on and off a few times along with doing the same with the kill switch it always comes on. 1988 F-150 50 will not start.

Turn key and nothing no instruments does not crank. Headlights come on horn works dome light works. Will crank by jumping across the starter relay but will not fire.

Replaced ignition switch no change. 2007 Tundra intermittent problem. Sometimes it starts right up other times nothing happens when I turn the key.

It has been happening for a few years but is getting more and more often. Now I need to turn the key 10-15 times before it turns over. Battery is strong as it turns over normally not sluggish and always starts once it does.

I had new battery installed 2 weeks ago. This is the likely cause if all other lights work but your car does not click. This is the switch you turn in the key or it could be part of it that is connected to that mechanism in the steering wheel.

To troubleshoot this turn on all your lights try to start the car. Checkcleantighten all connections on batterysolenoidstarterIgnition switch and neg - cable to frame or motor. Check to ensure all safety features are working properly and not engaged.

Check for an inline fuse bypass solenoid to see if engine cranks if it does replace solenoid if no crank replace starter. LEaving the key on and jumping across the starter solenoid the engine spins over as it should but doesnt start. Battery is good as the engine turns over when you jump across the solenoid.

I checked all the wiring connections. Sometimes it does go ahead and start but never by wiggling or tapping on anything.